Arb 3438320 Bedienungsanleitung PDF herunterladen (Seite 9)

Last Rev Date: 17/11/2009 Page 9 of 18 Fitting instructions# 3787059

PREPARATION TO VEHICLE

30. Install the impact absorber set as shown

31. Secure hand tight only, using M12 x1.25 X

35 bolt, washer and flange nut sets.

32. Use the original bolts to secure the tow hook

if it is to be refitted

33. Check the overall width of the mount

brackets by measuring the distance inside

the faces as shown. The two inside vertical

faces should be parallel to each other.

34. For reference, the ideal width is 910mm. If

the width is over this or well under, adjust the

brackets to achieve approximately this width

leaving the bolts snugged up, not finish

torqued.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Keine Kommentare

Arb 3438320 Bedienungsanleitung Seite 9