Arb 3438320 Bedienungsanleitung PDF herunterladen (Seite 15)

Last Rev Date: 17/11/2009 Page 15 of 18 Fitting instructions# 3787059

BULL BAR FITMENT TO VEHICLE

60. Fit the pinning bolts to the bull bar in the

drilled positions using 4 x M10 SEMS bolt and

washer sets and M10 flange nuts.

61. Assemble and install combination light

surrounds (p/n 3163015) as per instructions

no. 3786421 supplied with surround kit. Note:

Optional fog lamps can be installed at this

point as per fitting instruction no. 3783315

supplied with fog lamp kit no. 6821201.

62. Wire the combination lamp to the vehicles

indicator and clearance lamp wiring.

Caution: Cable tie all cables together and

keep all cables clear of sharp edges and

moving parts.

Wiring ARB supplied turn signal:

Green wire is Turn signal + (pos)

Red is running lamp + (pos)

Black is – (neg)

63. Attach the stone tray to the under side of

the bull bar with the black M6 bolts, flat

washers & spring washers.

There are four bolts in the front edge

and two in the back edge.

M10 PINNING BOLT

1 2 ... 10 11 12 13 14 15 16 17 18

Keine Kommentare

Arb 3438320 Bedienungsanleitung Seite 15