Arb 3438320 Bedienungsanleitung PDF herunterladen (Seite 10)

Last Rev Date: 17/11/2009 Page 10 of 18 Fitting instructions# 3787059

BULL BAR PREPARATION

35. Fit the buffers to either side of the bull bar

using 6 x M6 flange nuts. Do not over tighten.

36. Fit M6 cage nuts to four holes in lower pan

flange. The nut bodies are inside the bull bar

IF NOT FITTING A WINCH

37. Apply rubber mould to edge of winch hole

cover panel and trim off excess.

38. Fit panel to top face on bull bar using 2 x M6

dome head stainless steel screws, flange nuts

and flat washers.

NOTE: The flat washers are to be sandwiched

between panel and top face of bull bar to stop

the panel pulling down to form depression

around screw heads.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Arb 3438320 Bedienungsanleitung Seite 10