Arb 3915020 Bedienungsanleitung PDF herunterladen (Seite 5)

05/01/04

Page 5 of 9

3783077

10.

11. By undoing the screws on the side of the control

box, remove the top cover and replace the three

short leads with the longer ones supplied in the

fitting kit.

12. Position the control box bracket, then the lead

insulator bracket to the back of the control box.

13. Ensuring the leads are neatly on top of the bkt

place the cover bkt on and fasten with the

control box nuts and the M6 x 16mm bolt and

flange nut.

11.

14. Fasten control box assembly to the bar using the

M6 x 16mm bolts and flange nuts.

12.

15. Install the winch and roller fairlead using bolts,

nuts and spring washers supplied by Warn, and

the 25 x 11.5 x 1.6mm flat washers supplied in

the bolt kit. Refer to Warn installation

instructions for correct procedure. Adjust winch

in slots until the winch is centralised in the bull

bar.

16. Connect Control box leads to winch. Refer to the

Warn winch handbook for additional information.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Arb 3915020 Bedienungsanleitung Seite 5