Arb 3915020 Bedienungsanleitung PDF herunterladen (Seite 6)

05/01/04

Page 6 of 9

3783077

13.

(If not fitting winch)

17. Wrap rubber extrusion around the winch cover

and trim excess.

18. Place spacer washers over the winch cover

fixing holes, located on the top face of the winch

bumper.

19. Place the winch cover on top of the winch

bumper inline with the mount holes.

Bolt together using the M6 button head stainless

steel screws and M6 nuts.

14.

20. Using sharp scissors or a cutting blade , cut the

plastic inner guard as per line shown in the

photo.

15.

With winch

Without winch

(If fitting with winch.)

21. Peel off one side of the double sided tape and

adhere to the top rear side of the number plate.

Note: Clean the adhering surfaces before

applying tape with an alcohol solvent.

22. Peel off the other side of the tape and bolt to the

winch bumper with the M6 X 16mm bolts and

M6 flange nuts through the lower holes of the

number plate.

23. Press firmly to the top of the number plate so the

tape can properly adhere.

(If not fitting with winch.)Bolt the number plate

through the top holes using M6 X 16mm bolts

and M6 flange nuts. If desired the double sided

tape can be used down the sides of the number

plate.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Arb 3915020 Bedienungsanleitung Seite 6