Arb 3915020 Bedienungsanleitung PDF herunterladen (Seite 4)

05/01/04

Page 4 of 9

3783077

7. Push the top chrome tube through the hole in

the buffer and fasten using the M12 x 40mm

bolts, washers and spring washers.

8. Mount the Impact Absorber brackets to each

side of the chassis using original fasteners.

9. Fit flat washer 35 x 12 x 2.5mm to side hole of

bracket and fasten.

(If fitting the winch.)

10. To place the winch clutch handle in a convenient

location the winch gearbox must be rotated 2

hole spacings, 72 degrees, in an clockwise

direction when viewed from the gearbox end.

Place the winch on its end and remove all

gearbox bolts. Gently raise the gearbox just

enough to rotate it. Do not completely remove

the gearbox and avoid damaging the gasket.

Refit all bolts and tighten.

NOTE: Take care not to lift the assembly more

than a couple of millimeters while rotating to the

desired position to avoid unmeshing the gears.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Arb 3915020 Bedienungsanleitung Seite 4