Arb RD81 Bedienungsanleitung PDF herunterladen (Seite 12)

3 Approximate Backlash Shimming

3.1

Bench Measurement

In order to reproduce a similar pre-load and ring and pinion backlash

in your Air Locker to that of your existing differential, measurements

need to be taken so that a shim thickness can be calculated.

 Secure the differential to a work bench.

 Remove the bolts that hold the ring gear in place.

 Using a plastic or copper hammer, tap in a circle around the ring

gear to separate it from the differential carrier.

 Remove the original bearings from the differential center using a

bearing puller.

NOTE : Keep all shims and bearings separated so that they

can be identified as to which end of the differential

they came from.

 Examine the bearing cup and cone from Figure 5. for damage or

wear and, if necessary, discard it and replace it with the same size

and type of bearing.

Figure 5.

FACTORY DIFFERENTIAL

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Keine Kommentare

Arb RD81 Bedienungsanleitung Seite 12